-
Edelbrock Performer Series; Intake Manifold Bolt Kit 8559
Edelbrock 8559 8559 Performer Series; Intake Manifold Bolt Kit; Pontiac 326-455;
Find more:
-
Edelbrock EDL-2701: Edelbrock Performer EPS Intake Manifolds
Intake Manifold, Performer EPS, Dual Plane, Aluminum, Natural, Square Bore, Chevy, Small Block, Each
Find more:
-
Edelbrock 7101 Performer RPM Intake Manifold
The Edelbrock Performer RPM Intake Manifold is intended for high-performance street or competition engines that run up to 6,500 RPM with maximum power. The front height of the manifold measures 4.20 and the rear 5.25. The Performer RPMs are dual-plane, high-rise intakes with a 180 degree firing order. This manifold produces incredible top-end horsepower while retaining good throttle response. The Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams and other
-
Edelbrock 2131 AMC 290-401 Performer Intake Manifold
- Speed Unlimited carries the full line of Edelbrock components. We are an Authorized Edelbrock Warehouse Distributor. This is a brand new Edelbrock #2131 AMC 290-401 Performer Intake Manifold. E11-2131Fits AMC 290, 304, 343, 360, 390, 401 V8 EnginesPERFORMER AMC (idle-5500 rpm)Designed for 1970-91 street 290 -304 -343 -360 -390 -401 c.i.d. V8 engines. Will not accept stock Motorcraft spread-bore carburetor. #2131 is a stock replacement/street legal part on 360-401 V8s with OEM carb; 1970-72; except stock
Find more:
-
Edelbrock Performer Air-Gap Intake Manifold
Edelbrock Performer Air-Gap Intake Manifold Performer manfolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands. The Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range. This design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser air/fuel charge for more power. High-velocity runners deliver excellent throttle
$429.99Jeg's High PerformanceFind more:
-
Intake Manifold Ford: 351W, non-EGR, dual plane, square bore flange, aluminum, Performer
Intake Manifold Ford: 351W, non-EGR, dual plane, square bore flange, aluminum, PerformerFord: 351W, non-EGR, dual plane, square bore flange, aluminum, Performer intake manifoldThis Edelbrock Performer intake manifold is a dual-plane, low-rise design with a 180 degree firing order and patented runner design that you won't find in competitor brands. This design provides torque over a wide rpm range, especially off-idle through mid-range. It also provides improved throttle response over a stock manifold. Will
$199.79Find more:
-
Edelbrock - Performer X Series Intake Manifold
Edelbrock Performer X Series Intake Manifold Edelbrock - Performer X Series Intake Manifold
$319.79Find more:
-
Edelbrock Performer Series Intake Manifold ~ EDE 2116
:: Edelbrock Performer Series Intake Manifold ~ EDE 2116 Edelbrock Performer Series Intake Manifold ~ EDE 2116 Edelbrock Performer Series Intake Manifold ~ EDE 2116 Performer Vortec Manifold Details SKU EDE2116 Weight 17.30 lbs VH SKU EDE 2116 Vendor SKU 2116 Price: $179.99
$175.99Find more:
-
Edelbrock Performer E-Boss 351W Intake Manifold
1966-72 Performer(r) 289 Manifolds non-EGR (idle to 5500 rpm) Performer RPM Air-Gap(r) 289/302 Intake Manifold (1500-6500 rpm) 1966-72 Edelborck Performer(r) 260/289/302 Intake Manifold non-EGR (idle to 5500 rpm) w/ EduraShine 1965-66 Edelbrock Performer RPM(tm) 289/302 Manifold non-EGR (1500 to 6500 rpm) w/ EnduraShine Finis :: Edelbrock Performer E-Boss 351W Intake Manifold Edelbrock Performer E-Boss 351W Intake Manifold Ford 351W V8 (For Cleveland Heads) PERFORMER RPM E-BOSS 351 (1500-6500 rpm) Build a
$298.95Mustangs PlusFind more:
-
93-95 Honda Del Sol Edelbrock Performer X Intake Manifold
The Performer X intake manifolds for Honda Civics are engineered for street/strip applications where peak torque and horsepower gains are realized between 3000-7800 rpm. The larger-than-stock plenum volume and 9" runner length are tuned for producing peak power at high rpm. The Performer X Series manifold is ideal for all-motor and turbo applications. Upgrade at any time to bolt-on 4 auxiliary injectors by simply drilling out the pre-machined injector bosses and adding on the Secondary Fuel Rail Upgrade Kit
Find more:
-
3821 Performer 5.0 EFI Intake Manifold
More Power. The Edelbrock Performer EFI Intake Manifolds modular design incorporates modern air flow technology and CAD programming for maximum power gains of up to 37 horsepower at 5500 rpm, with no loss of low end torque. Three Piece Design. The upper and lower manifolds are CNC port-matched for maximum performance and feature a removable plenum cover that allows easy access to the runners for modifications. Application: The Edelbrock Performer EFI Intake Manifold is designed for use on the 19
$579.99American MuscleFind more:
-
Intake Manifolds, Performer By Edelbrock
Product Detail Intake Manifolds, Performer By Edelbrock Chrysler 361-400 c.i.d. V8 (non-EGR) Designed for street 361-383-400 c.i.d. Chrysler V8s that measure 7.75" across block. For EGR, #2186 is stock replacement/street legal part for 400 V8s with OEM 4-bbl. carb.; 1972-78. For non-EGR, #2186 is stock replacement/street legal part for 361-383-400 V8s with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR. May be used with OEM or aftermarket carbs Airtex Super Mechanical Fuel Pumps $32.56
$205.97motorpartscentralFind more:
-
Intake Manifolds, Performer By Edelbrock
Product Detail Intake Manifolds, Performer By Edelbrock 429/460 c.i.d. Ford V8s. #3766 is stock replacement/street legal part for 460 V8s with OEM 4V carburetor with electric choke; 1979-87. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not accept stock spread-bore carb. Will not fit 1988 and later models. #3766 cannot use #8714 to block-off EGR
$239.40Northernautoparts.comFind more:
-
INTAKE MANIFOLDS, 1986-1995, PERFORMER RPM II
INTAKE MANIFOLDS, 1986-1995, PERFORMER RPM II INTAKE MANIFOLDS, 1986-1995, PERFORMER RPM II DM-Part#: 6482 MFG-Part#: 7123 MUST USE INLET ADAPTER #8706 WHEN INSTALLING ON 94-95 MUSTANGS.
$639.99Find more:
-
Edelbrock Performer 2-0 Intake Manifold, Big Block with Oval Port, PermaStar Finish
Edelbrock Performer 2-0 Intake Manifold, Big Block with Oval Port, PermaStar Finish Performer 2-0 series manifolds are a Dual-plane, low rise design with a 180° firing order that greatly improves torque over a wide rpm range for excellent throttle reponse and street drivablity from off-idle through 5500 rpm. Use with square bore or spread bore carburetors as applicable. Will not fit "tall blocks". Item Number: 13122 $335.95 EA
$335.95 -
Performer Intake Manifold - Non-EGR model by Edelbrock®
1970-91 with AMC 304, 360 or 401 V8 engine for Jeep
Find more:
-
Performer EPS Intake Manifold(Idle-5500)
Shopping Cart Performer EPS Intake Manifold(Idle-5500) Chevy SB EDE2701 $144.99 Designed for 1986 and earlier 262-400 cubic inch Chevys. This small-block Chevy manifold has an all-new runner design that's "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold EDE2101. 0.960 s
$139.99dougherbert -
Edelbrock® Performer Intake manifold
Edelbrock® Performer Intake manifold For instalinng Mikuni HSR 42/45 carb on Edelbrock heads. Edelbrock® Performer Intake manifold Part Number: Everyday Low Price: Gold Club Price: 433-736 $93.99 $84.59 Description Specs • 3 piece spigot style intake manifold • Works directly with Edelbrock® Twin Cam® 95″ Performer package or Performer heads • For use with Edelbrock® spigot carb, Mikuni HSR45 or 44mm Kehin CV carbs 1999 - 2000 Dyna® Low Rider Convertible 1999 - 2001 Dyna Wide Glide® 1999 - 2001 Road Glide®
$93.99Find more:
-
Edelbrock (4754) Intake Manifold - Performer X - Natural Finish
The Performer X intake manifolds for Honda and Acura's are engineered for street/strip applications where peak torque and horsepower gains are realized between 3000-7800 rpm. The larger-than-stock plenum volume and 9" runner length are tuned for producing peak power at high rpm. The Performer X Series manifold is ideal for all-motor and turbo applications .Upgrade at any time to bolt-on 4 auxiliary injectors by simply drilling out the pre-machined injector bosses and adding on the Secondary Fuel Rail
$335.00PhantasmUSAFind more:
-
LTD Performer RPM 302 Intake Manifold Non-EGR 1500-6500rpm Air-Gap 302 65-66 Ford 289-302 cid For 4 bbl Carb Endurashine™
> Item Number: 71214 LTD Performer RPM 302 Intake Manifold Non-EGR 1500-6500rpm Air-Gap 302 65-66 Ford 289-302 cid For 4 bbl Carb Endurashine™ Manufacturer Item #71214 Best for the Ultimate in Street High-Performance Retains Good Throttle Response and Acceleration Produces Incredible Top-End Horsepower Designed for 1500 to 6500 RPM Street-Driven Power Dual-Plane High-Rise Intake w/180 deg Firing Order LTD Performer RPM 302 Intake Manifold Non-EGR 1500-6500rpm Air-Gap 302 65-66 Ford 289-302 cid For 4 bbl
$397.43Find more:
sponsored links
-
Performer Intake Manifold
Carburetor Intake Mainfolds at JEGS. Fast Same-Day Shipping.
JEGS.com -
Buy Edelbrock Carburetors
Edelbrock Carbs & Intake Manifolds Will Beat Any Price. Free Shipping.
www.StreetSideAuto.com/edelbrock -
Performer Intake Manifold
Parts & More at a great deal! Parts & More on eBay Motors.
www.eBayMotors.com -
An Intake Manifold
Connect to Stores & Catalogs for All Your Holiday Shopping Needs Here.
CatalogLink.com
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
