-
Edelbrock RPM Air Gap 340/360 75764
Edelbrock 75764 75764 RPM Air Gap 340/360; Intake Manifold; Endurashine; Non -EGR ;1500 -6500rpm ;Mopar 340-360;4 bbl Carb;Accepts Early-Style Waterneck Only;Street/Hi Perf. Use Only;
Find more:
-
Edelbrock EDL-7561: Edelbrock Performer RPM Air-Gap Intake Manifolds
Intake Manifold, Performer RPM Air Gap, Dual Plane, Aluminum, Natural, Chevy, Big Block, Oval Port, Std. Deck
-
Edelbrock 7516 Performer RPM Air-Gap Intake Manifold
The Edelbrock Vortec RPM Air-Gap Intake Manifold is based on the powerful Performer RPM Vortec EDL-7116. This single four-barrel intake is designed for 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads. The RPM air-gap manifold delivers outstanding performance using the same air-gap technology found in our race-winning Victor manifolds. This unique design separates the hot engine valley from the air/fuel mixture for a cooler, denser charge and more power throughout the RPM
-
Edelbrock RPM Air-Gap Dual-Quad; Intake Manifold/Carburetor Kit 20684
Edelbrock 20684 20684 RPM Air-Gap Dual-Quad; Intake Manifold/Carburetor Kit; Endurashine; Incl. Intake/500cfm Carbs.Fuel Line /Gaskets /Ignition Control Module/Wiring Harness/MAP Sensor; Chevy LS1;
Find more:
-
Edelbrock RPM Dual Quad Air-Gap 350 Engine
45004 - Edelbrock RPM Dual Quad Air-Gap Engine This new GM 350 cast iron short block with 4-bolt mains has a Performer camshaft matched to the compression ratio, manifold, and carbs for smooth performance from idle to 5500 RPM. SPECIFICATIONS 315 HP 372 ft/lbs TQ 2 year/unlimited mileage warranty Compression Ratio: 9:1 Endurashine finish Edelbrock aluminum 64cc heads (2.02" Int/1.60" Exh valves) Cast aluminum pistons Precision-machined crankshaft Steel connecting rods MSD Pro-Billet Distributor with Blaster
$9.99Jeg's High PerformanceFind more:
-
Edelbrock 75613 BBC NASCAR RPM Air Gap Intake Manifold
- Edelbrock #75613 NASCAR Edition BB Chevy Performer RPM Air Gap Intake Manifold, Oval Port, Black Finish. E11-75613 Description: RPM AIR-GAP 2-O (1500-6500 rpm) Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads (1975 and earlier), the new RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years.The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a
Find more:
-
Edelbrock - NASCAR Edition RPM Air-Gap Intake Manifold
Edelbrock NASCAR Edition RPM Air-Gap Intake Manifold Edelbrock - NASCAR Edition RPM Air-Gap Intake Manifold
Find more:
-
1970-73 Edelbrock RPM Air-Gap 351C Manifold non-EGR (1500-6500 rpm)
:: 1970-73 Edelbrock RPM Air-Gap 351C Manifold non-EGR (1500-6500 rpm) 1970-73 Edelbrock RPM Air-Gap 351C Manifold non-EGR (1500-6500 rpm) RPM Air-Gap 351C Manifolds non-EGR (1500-6500 rpm) Edelbrock has several styles of aluminum intake manifolds to fit different applications. Each style of manifold has characteristics that make it ideal for the application for which it is intended. Years of design and testing in the area of induction technology have given the Edelbrock team invaluable insights into which
$345.95Mustangs PlusFind more:
-
Edelbrock RPM Air Gap (1500-6500 rpm) - AMC/Jeep
Edelbrock RPM Air Gap (1500-6500 rpm) - AMC/Jeep Edelbrock RPM Air Gap (1500-6500 rpm) - AMC/Jeep SKU: EDE7531 RPM Air Gap; Intake Manifold; Non-EGR; 1500-6500rpm; For Square Bore Carbs Only; Cast Finish;
$279.99Find more:
-
Edelbrock Performer RPM Air-Gap 2-0 Intake Manifold, Big Block w/ Rectangular Port
Edelbrock Performer RPM Air-Gap 2-0 Intake Manifold, Big Block w/ Rectangular Port Performer RPM "Air Gap" is a dual-plane, high-rise manifold like the Performer RPM with the addition of Edelbrock's patented "Air Gap" design which features an open air space under the runners that separates them from the hot engine oil. This design produces a cooler, denser charge for more power. Great for street or strip with a power range of 1500-6500 rpm. Use with square bore carburetors only. Will not fit "tall blocks".
$284.95 -
Edelbrock RPM Air-Gap Intake Manifold (351W)
Add FREE Edelbrock Hat: FREE Edelbrock Hat (+$0.00) Product Features More Power Great for stroked 351-W Lightweight cast aluminum Fits 351 Windsor V8 Mustangs Made in the USA Increase the horsepower of your classic muscle pony with a Edelbrock RPM Air-Gap Intake Manifold. Product Description Free Gift. Now for a limited time receive a Free Edelbrock Hat with the purchase of this Edelbrock Intake Manifold, compliments of Edelbrock and AmericanMuscle. While supplies last. More Power. Edelbrock designed their
Find more:
-
Edelbrock EDL-7501: Edelbrock Performer RPM Air-Gap Intake Manifolds
Intake Manifold, Performer RPM Air Gap, Dual Plane, Aluminum, Natural, Square Bore, Chevy, Small Block, Each
Find more:
-
7520 - Edelbrock RPM Air-Gap Dual-Quad Manifold
7520 - Edelbrock RPM Air-Gap Dual-Quad Manifold Edelbrock Air-Gap Dual-Quad Manifolds feature an award-winning design that incorporates the same race-winning technology that's been used in the Victor Series competition intakes for years. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. RPM Air-Gap manifolds are modeled after Performer RPM intakes for high performance street power from 1500-to-6500 rpm.
$349.99Jeg's High PerformanceFind more:
-
Edelbrock 7501 Performer RPM Air-Gap Intake Manifold
The Edelbrock Performer RPM Air-Gap Intake Manifold is manufactured from aluminum and given a natural finish. The exclusive Air-Gap design features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The runners are tuned up to move the power band 1,000 RPM higher than Performer Air-Gap manifolds, from idle-5,500 RPM up to 1,500-6,500 RPM. It also features nitrous bosses, rear water outlets and two distributor clamp locations.
Find more:
-
RPM Dual-Quad Air Gap Vortec Intake Manifold Non -EGR1500 -6500rpmChevy Small Block 262-400 cidw/96 And Later Vortec CastIron Or Edelbrock E-Tec Alum Heads Endurashine™
> Item Number: 75264 RPM Dual-Quad Air Gap Vortec Intake Manifold Non -EGR1500 -6500rpmChevy Small Block 262-400 cidw/96 And Later Vortec CastIron Or Edelbrock E-Tec Alum Heads Endurashine™ Manufacturer Item #75264 Air Gap = Cooler and Denser Mixture for More Power Finish-Bright Silver Chrome That Will Not Discolor Based on C26 Low Profile with Unique Air Gap 1.625 in. Taller Than Low-Profile PN[5425] Also Available As Complete Kit PN[2026/20264] RPM Dual-Quad Air Gap Vortec Intake Manifold Non -EGR1500
$522.93Find more:
-
Edelbrock Performer RPM Air-Gap Intake Manifold- Natural, Square Bore, Ford, 351W
Edelbrock Performer RPM Air-Gap Intake Manifold- Natural, Square Bore, Ford, 351W EDL-7581 $308.81 Deliver a cooler, denser air/fuel mixture to your cylinders. Edelbrock's Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser
$308.81Bonehead PerformanceFind more:
-
Edelbrock 75014 Performer RPM Airgap intake manifold Endurashine Chevrolet small block
Edelbrock 75014 Performer RPM Airgap intake manifold for Chevrolet small block engines incorporates the same technology used on the Victor competition intakes. The Edelbrock 75014 Performer RPM Airgap design features an open air space that seperates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets and two distributor clamp locations and nitrous bosses. Power band of 1,500 rpm to 6,500 rpm. Designed for 1955-1986 262ci-400ci small block
$339.99Spider Performance AutomotiveFind more:
-
Edelbrock 7107 GM LT1 LT-1 RPM Air Gap Intake Manifold
- Speed Unlimited carries the full line of Edelbrock components. We are an Authorized Edelbrock Warehouse Distributor. This is a brand new Edelbrock GM LT1 Performer RPM Air Gap Intake Manifold. E11-7107For Chevrolet LT1 V8 (1992 -1997 )PERFORMER RPM AIR-GAP (1500-6500 rpm)Utilizing the proven short runner tunnel-ram style, both of these manifolds provide the next step up in performance for LT1 and LT4 owners. These are both direct stock replacements for OEM equipment with all required emissions features.
Find more:
-
Edelbrock Performer RPM Air Gap Intake Manifold: Chevy Small Block V8 262-400
> Edelbrock Performer RPM Air Gap Intake Manifold: Chevy Small Block V8 262-400 Edelbrock Performer RPM Air Gap Intake Manifold: Chevy Small Block V8 262-400 Product Description Edelbrock Performer RPM Air Gap Intake Manifold: Chevy Small Block V8 262-400 Chevrolet 262-400 Small-Block V8 RPM AIR-GAP (1500-6500 rpm) The Original... Our Proven, Race-Winning Air-Gap Design in a Dual-Plane Manifold Designed for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same
$256.71Built By Notorious -
Edelbrock Performer RPM Air Gap Sbc Chevrolet NEW 7501
7501 Edelbrock Intake manifold SBC RPM AIR-GAP (1500-6500 rpm)The Original... Our Proven, Race-Winning Air-Gap Design in a Dual-Plane ManifoldDesigned for 1955-86 262-400 c.i.d. Chevrolet V8s, the award-winning RPM Air-Gap incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two
$218.97napartsnetFind more:
sponsored links
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
