Neuspeed's billet lower front tie-bar eliminates flexing at the lower control arm chassis pick-up points. The result is improved stability and handling. Notes: Billet aluminum, black anodized. Fits both 5 speed and automatic transmission vehicles. Does not fit Beetle convertible models.
Front Lower Control Arm Brace 1991-1994 Nissan Sentra (incl. SE-R) front lower control arm brace . This brace attaches to the backside of the front lower control arms and also to the front sub-frame to stiffen up the chassis for maximum performance. Includes all necessary installation hardware. There are no ground clearance issues with the bar and it only weighs 5 pounds. PROGRESS TECHNOLOGY Established in 1995, The PROGRESS Group Inc. has evolved from modest beginnings as a distributor of suspension
Total Handling Suspension Kit - Incl. Front And Rear Shocks/Coil Springs/Upper And Lower Trailing Arms/Tubular Trailing Arm Braces
Stiffen up your S2000 chassis with the Password:JDM Rear Frame Brace! Precision crafted from lightweight 6061 aluminum, The Password:JDM Rear Frame Brace is available in your choice of either black or red hard anodized finish. Fits all 2000-2008 S2000 models. Utilizes all factory mounting locations.
Whiteline Rear Brace-lower control arm: Honda - Civic EG,EH (91-94) inc (92-98) CRX, Integra DC1-2 (93-01) hatch excl Type R #8191 KSB710 $80.99 $62.30 Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly. Race cars have elaborate roll cages not just to protect the occupant, a good proportion of its job is to stiffen the chassis. Critical for
Tein Mitsubishi Evo 8/9 Front Strut Tower Brace GTSpec WRX STI Front Ladder Bar (Lower Arm Brace) [gts GTS-SUS-1046] Description: GTSpec WRX STI Front Ladder Bar (Lower Arm Brace) [gts GTS-SUS-1046] This four point undercarriage brace reinforcing the connection between the control arms and chassis, improves road handling and structural integrity. Shopping Cart
Whiteline Front Brace-lower control arm: Nissan - NX B13 (91-94) coupe, Pulsar N14 (91-95) excl GTiR, N15 (95-00), Sentra B13 (91-94), B14 (95-99) #8853 KSB713 $272.65 $209.73 Weight aside, the more the better. Chassis bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex. In fact, it helps every component in the suspension system do its job properly. Race cars have elaborate roll cages not just to protect the occupant, a good proportion of its job is to stiffen the
FRONT LOWER A-ARM BRACE 05/10 MUSTANG (FRPP) Front Lower A-Arm Brace 2005-2010 Mustang (Ford Racing). -Original equipment on convertible & 2007 SVT Mustang -Increased chassis stiffness -Fits 2005-08 Mustang GT coupe Related Parts: -14" Brembo Brake Upgrade Kit, #M2300S -Brake Cooling Kit, #M2004A -Front Lower Control Arm Kit, #M3075E M5025A 01
GReddy Triple Tube Lower Arm Brace (Rear) Scion xB (2004-2007 All) PTGRE14013201 Shipping:
> Greddy Lower Arm Brace for Mazda RX-7 (93-96) - Front 14043200 Greddy Lower Arm Brace for Mazda RX-7 (93-96) - Front 14043200 Item# 14043200 Retail Price: $240.00 CIP Price: $228.00 Product Description Greddy Lower Arm Braces increase chassis rigidity as well as reduce flex for other suspension components. Our new blue braces bolt onto key chassis or suspension mounting points and use the same strong, yet lightweight extruded triple-tube bars, found in Greddy Strut Tower Bars.
Hot Bodies HB Lightning Stadium 10 Parts HBS66552 Hot Bodies Rear Lower Arm Brace [HBS66552] This is the replacement aluminum rear lower arm brace for the Hot Bodies Lightning Stadium 10.
> Item Number: 1803A Rear Suspension Package Incl. Adj. Upper Trailing Arms/Lower Trailing Arms/Trailing Arm Mount Braces/Hardware Manufacturer Item #1803A Reduces Wheel Hop Cure Unwanted Driveline Vibration Includes Instructions And Grade 8 Hardware Direct Bolt In Improves Traction and Handling Rear Suspension Package Incl. Adj. Upper Trailing Arms/Lower Trailing Arms/Trailing Arm Mount Braces/Hardware Suspension Package
Tubular strength and adjustable to boot! Control Freak Adjustable Tubular Lower Control Arm for 05-08 Mustangs If you need a strong control arm for your 05+ Mustang, look no further! Control Freak's new tubular adjustable arm is just what the doctor ordered. Great for drag race or road race applications. Application: 2005-2008 Mustangs Manufactured by Control Freak Quality chassis bracing from BMR BMR Fabrication Adjustable Lower Tubular "Race" A-Arms 05-08 Mustang BMR Fabrication Non-Adjustable Lower
Cusco WRX STI Lower Arm Bar Type I Brace [CUS 666 475 A] Description: Cusco WRX STI Lower Arm Bar Type I Brace [CUS 666 475 A] The Type I lower arm bar is made of tubular aluminum to help reduce weight over the stock bracing without compromising strength. Coated in the classic Cusco blue paint, it offers years of protection against the elements while adding to the overall look of the bar. The Type I bar is a 2-point setup and includes all the required hardware for installation. It bolts on easily using
GTSPEC Lower Subframe Reinforcement Brace Subaru WRX STI 02-07 [GTS-SUS-1092] GTSPEC Lower Subframe Reinforcement Brace Subaru WRX STI 02-07 description GTSPEC Lower Subframe Reinforcement Brace Subaru WRX STI 02-07 GTSPEC’s Under-Body Braces are designed with one purpose: to gain an edge over the competition and shave time off your laps. Most OEM designs are made for the average consumer in mind, not the ones seeking the ultimate in performance and handling. GTSPEC Under-Body Braces are manufactured from
Greddy Lower Arm Brace: B-Bar : Mitsubishi Lancer EVO VIII & IX Under Braces Greddy Lower Arm Brace: B-Bar : Mitsubishi Lancer EVO VIII & IX #19284 Greddy Lower Arm Braces increase chassis rigidity as well as reduce flex for other suspension components. Our new blue braces bolt on to stock mounting points and use the same strong yet light-weight extruded triple tube bars found in our Strut Tower Bars. Part number: 14033202 *Note: Includes "B-Bar" (Rectangular) Arm Only!* Details
> Greddy Front Lower Arm Braces Scion xB Under Braces Greddy Front Lower Arm Braces $71.25 Retail Price: $75.00 DESCRIPTION Suspension upgrades such as high performance springs, shocks and tires can add additional stress to the chassis resulting in additional chassis flex. GREX Lower Arm Bars improve chassis rigidity and reduce this flex.
UMI Performance Control Arm Reinforcements /Frame Braces (1964-1967 GM A-Body) [4029] $104.99 Points & Redemptions Credit: 0.52495 Points Currently Valued at $0.52 Trailing arm mount braces are designed to reinforce the upper and lower front control arm mounts on your classic A-Body. The more power your ride makes the better chance of bending or breaking the rear control arm mounts. These tubular reinforcements tie the upper and lower control arm mounts together for added strength and driving performance.
> GTSPEC Rear Lower Arm Brace for Subaru Impreza 93-01 GC8 GTSPEC Rear Lower Arm Brace for Subaru Impreza 93-01 GC8 Item# GTS-SUS-1096 Retail Price: $85.00 CIP Price: $76.50 Product Description GT SPEC aluminum rear lower tie brace for GC8.
Unlike the many "steel pipe crimped at both ends" braces available from others, the Racing Beat Front Lower Control Arm Brace is a thick, cast aluminum brace that is both lightweight and rugged. As quoted by Miata Magazine, "The Racing Beat subframe brace is the nicest one we��ve ever seen, including Mazda��s."Our brace has been powder-coated to virtually eliminate corrosion and is quickly installed beneath the transmission bell housing, attaching at the lower control arm chassis mounts. This brace attaches