led resistor

Xantech 789-44 1-Zone Connecting Block

"connects 4 emitter ports & power supply to all xantech ir receivers & keypads 4 parallel emitter ports with 470w resistors drive 4 single or 4 dual emitters quick-connect stereo mini jack for xantech ir receivers that use a stereo mini plug status terminal for connection of xantech ir receivers & keypads with status indicator leds 2.1mm coaxial power jack uses either the xan781rg or xan78200 power supply dim: 1.75""h x .3""w x .81""d"

Alarm Controls LDG GREEN LED, BUILT-IN RESISTOR, 6? LEADS, 12 /24 VOLTS DC, PACKAGE OF 10 EACH

GREEN LED, BUILT-IN RESISTOR, 6? LEADS, 12 /24 VOLTS DC, PACKAGE OF 10 EACH

LED/Resistor/Switch Combo

A simple red LED attached to resistor and switch. Requires 6-8V DC to light up. Pkg. of 10. Found in Components

CBR 929RR 01 6 Ohm, 50 Watt LED light bulb Load Resistor 2001 CBR 929RR Automotive LED Light Bulb Load Resistor Kit - Solve the Signaling Problem with LED Bulbs interior dome light bulb

01 HONDA MOTORCYCLE CBR 929RR interior dome light bulb LED Bulb Load Resistor 6 Ohm / 50 Watt For Signal or Brake light with Dual Filament LED bulbs upgrade USE -- LED bulbs may cause some newer vehicles to indicate a bulb is burnt out (because of their low power consumption). Some cars indicate this by increasing the flash rate of the turn signals, some turn on a bad bulb indicator. This can be remedied with our Load Resistors wired across the turn signal bulbs to simulate a filament bulb load. This 6 Ohm,

Alarm Controls LDY YELLOW LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

YELLOW LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

CBR 929RR 00 6 Ohm, 50 Watt LED light bulb Load Resistor 2000 CBR 929RR Automotive LED Light Bulb Load Resistor Kit - Solve the Signaling Problem with LED Bulbs interior dome light bulb

00 HONDA MOTORCYCLE CBR 929RR interior dome light bulb LED Bulb Load Resistor 6 Ohm / 50 Watt For Signal or Brake light with Dual Filament LED bulbs upgrade USE -- LED bulbs may cause some newer vehicles to indicate a bulb is burnt out (because of their low power consumption). Some cars indicate this by increasing the flash rate of the turn signals, some turn on a bad bulb indicator. This can be remedied with our Load Resistors wired across the turn signal bulbs to simulate a filament bulb load. This 6 Ohm,

Alarm Controls LDRB RED BI-COLOR LED. BUILT-IN RESISTOR, 6" LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

RED BI-COLOR LED. BUILT-IN RESISTOR, 6" LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

Alarm Controls LDR RED LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

RED LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

Alarm Controls LDRF RED FLASHING LED. BUILT-IN RESISTOR, 6" LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

RED FLASHING LED. BUILT-IN RESISTOR, 6" LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

Alarm Controls LDR-L LARGE ??? RED LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

LARGE ??? RED LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

Alarm Controls LDG-L LARGE ??? GREEN LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

LARGE ??? GREEN LED, BUILT-IN RESISTOR, 6? LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

Alarm Controls LDY-L LARGE ??? YELLOW LED, BUILT-IN RESISTOR, 6" LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

LARGE ??? YELLOW LED, BUILT-IN RESISTOR, 6" LEADS, 12/24 VOLTS DC, PACKAGE OF 10 EACH

Indicator, Pnl-Mnt; LED Pilot ; Full Voltage/Solder Terminal; Flat Lens; 24 VDC; Green

Customer Rating IDEC Corporation Indicator, Pnl-Mnt; LED Pilot ; Full Voltage/Solder Terminal; Flat Lens; 24 VDC; Green AP6M122-G 814-1119 Input: Full voltage. Operational Voltages: 12, 24 VDC. Current Ratings: 11 mA @ 12 VDC; 11 mA @ 24 VDC. Insulation Resistance: 100 MΩ minimum (500 VDC megger). Reverse Withstand Voltage: 200 V. Degree of Protection: IP65. Terminal Style: Solder type, 16 mm mounting hole. Color, Lens Lamp Type Lens Color Mount Method 16 " w/Resistor & Diode Complete Unit Voltage,

50PCS 8mm SUPER BRIGHT BLUE Diffused LED FREE RESISTOR

20 - 8mm or 5mm LED Accent Lights

8mm LED Accent Lights BEST DEAL ON THE BEST LEDS! 8mm ALL 20 LEDs Each come with wire & resistor attached for 12V use. You need not do any work assembling! Will work for 6V-14V DC applications. 8mm is the lense diameter (same brightness) 8mm 25 degs Assembled in the USA! Best Quality! Water Proof (not recommended for long term use in water) You do not need anything else! Plug Play with any 6-14V Battery Instructions click here! 20 - 8mm or 5mm LED Accent Lights You do not need anything else buy powering

Yellow LED T1 (3mm)

Yellow LED T1 (3mm) LIN-4303F7 Series resistors are not included unless listed as in the table above. QTY: 1 LED Yellow LED T1 (3mm) Standard T1 LED for general purpose applications. LED SPECS: Color: Yellow Lens Color: Yellow/Diffused Viewing Angle: 20 Degrees Size: 3mm Luminouse Intensity lv: 14 mcd Supply Voltage: 6 / 12 VDC Series Resistor: 470 / 1000 Ohm Forward Voltage (vF@If=_mA): 2 @ 10mA Holder/Bezel: INCLUDED Click image to enlarge:

Indicator, Pnl-Mnt; LED Pilot ; Full Voltage/Solder Terminal; Dome Lens; 24 VDC; Green

Customer Rating IDEC Corporation Indicator, Pnl-Mnt; LED Pilot ; Full Voltage/Solder Terminal; Dome Lens; 24 VDC; Green AP6M222-G 814-1109 Input: Full voltage. Operational Voltages: 12, 24 VDC. Current Ratings: 11 mA @ 12 VDC; 11 mA @ 24 VDC. Insulation Resistance: 100 MΩ minimum (500 VDC megger). Reverse Withstand Voltage: 200 V. Degree of Protection: IP65. Terminal Style: Solder type, 16 mm mounting hole. Color, Lens Lamp Type Lens Color w/Resistor & Diode Voltage, Operating

3mm, 5mm, 8mm, 10mm or 12mm LED Light Bulb Wired, w/ Resistor attached, works on 6V to 12V great for cars or other projects. Various colors.

These LED light bulbs each has a voltage-dropping resistor attached, they are ready to work with a 6V-12V DC power source. Just wire up to any DC power source or battery from 6V to 12V.

1.8mm Universal Input LED

1.8mm Universal Input LEDsOur Smallest LED, these 1.8mm 100,000 hour Super Bright LEDs come Fully Assembled with a super compact full wave Bridge Rectifier, for "always on" forward and reverse operation, a dropping resistor and 6" of insulated wire. Connect these LEDs to any track power source: AC DC or DCC they will work great with 5-19 Volts of power. These LEDs look great as Locomotive Headlights, Passenger Car Lighting, Ditch Lights, Yard Lights, Building Lighting, and more.Brightness: White >7,000 mcd

Indicator, Pnl-Mnt; LED; Green; 4mcd; 1/4In; 12V; 0.75In; 13mA; 0.03InT; 0.53InH; 15mA I

Customer Rating Indicator, Pnl-Mnt; LED; Green; 4mcd; 1/4In; 12V; 0.75In; 13mA; 0.03InT; 0.53InH; 15mA I 5102H5-12V 679-9916 Super-brite 30 mcd Low current Built-in resistor chip operates directly off 5⁄12 V supply without external resistor Mounting will snap-fit in 0.249⁄0.254 in. hole in panels 0.031⁄0.062 in. thick. Wire leads: 24 AWG, 6 in. insulated, bonded strands, stripped 1⁄2 in.. Red lead anode (+). Black nylon housing. Color, Lens Current, Forward 15 mA (Max.) (Continuous) Diameter, Mounting Hole

Indicator, Pnl-Mnt; LED; Red; 4mcd; 1/4In.; 12V; Wire Lead; 13mA; Nylon; 0.530In.H; 15mA

Customer Rating 4 out of 5 Indicator, Pnl-Mnt; LED; Red; 4mcd; 1/4In.; 12V; Wire Lead; 13mA; Nylon; 0.530In.H; 15mA 5102H1-12V 679-9914 Super-brite 30 mcd Low current Built-in resistor chip operates directly off 5 volt or 12 volt supply without external resistor Color, Lens 13 mA Current, Forward 15 mA (Max.) Diameter, Mounting Hole 1⁄4 in. 0.530 in. (Body), 0.220 in. (Lens) Lamp Type Lens Color Light Source Luminous Intensity 4.0 mcd (Typ.) Mount Method 0.252 " Panel Mount Built-In Resistor Leads

CML Innovative Technologies Indicator, PCB, Red LED, T-1 3/4 RA, 8 mcd, Built-In Resistor, 5V, Red Lens

CML Innovative Technologies Indicator, PCB, Amber LED, T-1 3/4 RA, 8 mcd, Built-In Resistor, 5V, Amber Lens

LED-206 > LED RESISTOR

Rainbow Flashing 5mm LED - G13897

V the output on this flashing color mixing brilliant LED. Operates from a 3.5VDC and has a water clear lens. When power is applied it flashes each color; red, blue and green for several seconds, then it slowly mixes and fades the colors together to form other colors. Beautiful, brilliant and awesome. Long leads - factory prime. Use a 100 &Omega; resistor in series with a 9V battery if you desire to use it at a higher voltage. G13897 </font&gt;

48 ME-LED-B3V-250C 3- LED Array Lighting Module PCB_100204

MeasureExplorer LED product: ME-LED-B3V-250C PCB, 48 This is a lot of 48 MeasureExplorer 3-LED array module PCB. This is 3 5mm LED PCB, design driving power voltage 12V. The circuit is very simple, 3 LEDs are connected inseries with a current limiting resistor. Circuit is very simple, but this PCB offers user a solution of organizing the little LEDs together to build a large light system. Take a look at following pictures you'll find this little board is great. You have two ways to power this module: There

50 X 5mm infrared IR led lamp 940nm Free RESISTOR

IND DEVICE 5110F7 LED PN L MT YEL W/BLK AND RED LE ADS

Ind-Device - Ind Device 5110F7 Led Pn L Mt Yel W/Blk And Red Le Ads Led Features • Super Brite T-1 LED • Diffused lens allows wide angle viewing. • Low current -only 2 mA. • Built -in chip resistor oper ates directly off 5 and 12 volt supply , no external resistor needed. Mounting: Will snap-fit into Ø .155/.158 hole in panels .031/.062 thick* Wire Leads: No.24 AWG, 6" long, stripped .250 Anode(+): Red lead Housing: Black Nylon *We recommend using an installation t ool to press against flange of housing

IND DEVICE 5110F7 LED PN L MT YEL W/BLK AND RED LE ADS

Ind-Device - Ind Device 5110F7 Led Pn L Mt Yel W/Blk And Red Le Ads Led Features • Super Brite T-1 LED • Diffused lens allows wide angle viewing. • Low current -only 2 mA. • Built -in chip resistor oper ates directly off 5 and 12 volt supply , no external resistor needed. Mounting: Will snap-fit into Ø .155/.158 hole in panels .031/.062 thick* Wire Leads: No.24 AWG, 6" long, stripped .250 Anode(+): Red lead Housing: Black Nylon *We recommend using an installation t ool to press against flange of housing

Position Monitoring (10k Resistor)

l> Enc Rly, SPDT, 10A, w/Monitored HOA, 0-10K Position Monitoring (10k Resistor) With a concealed HOA switch for local control and troubleshooting, the V101, 102 & 103 provide HOA fl exibility while limiting unauthorized switch manipulation. To further guard against control system override the V102 and V103 are equipped with a monitored HOA. The V102 provides a two-wire 0-10kÙ resistive output and the V103 a three-wire digital monitor. Now your cus tom er and technicians can enjoy the benefi t of local