-
Edelbrock EDL-7102: Edelbrock Performer RPM Cam and Lifter Kits
Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 308/318, Lift .488/.510, Chevy, Small Block, Kit
Find more:
-
Edelbrock 7102 Performer RPM Cam and Lifter Kit
The Edelbrock Performer RPM camshaft kits are designed for high-performance street applications. These hydraulic lifter camshafts are dyno-matched to Edelbrock's Performer line of intake manifolds to provide increased horsepower and optimum torque from the low-end to the mid-range. The intake � � �valve � � �lift � � �with � � �factory � � �rocker � � �arm � � �ratio is 0.448 and exhaust valve lift is 0.510. Headers, high energy ignition systems, lower than stock rear end gearing and a high performance
Find more:
-
Edelbrock 7106 Perf Rpm Cam Lifters Kit Ford FE 352 428
"7106 Edelbrock Cam KitENGINE: FORD 390-428 V8RPM RANGE: 1500-6500Duration at 0.006"" Lift: Intake: 296? Exhaust: 296? Duration at 0.050"" Lift: Intake: 236? Exhaust: 236? Lift at Cam: Intake: 0.325"" Exhaust: 0.325"" Lift at Valve: Intake: 0.572"" Exhaust: 0.572"" Timing at 0.050"" lift: Open Close Intake: 15? BTDC 41? ABDC Exhaust: 51? BBDC 5? ATDC Centerlines: Lobe Separation - 108? Intake Centerline - 103? Note: Will not work in 427 side-oilers. Isky spacer #350AW for all FE Fords 1962 & earlier
$185.97napartsnet -
Edelbrock 7101 Performer RPM Intake Manifold
The Edelbrock Performer RPM Intake Manifold is intended for high-performance street or competition engines that run up to 6,500 RPM with maximum power. The front height of the manifold measures 4.20 and the rear 5.25. The Performer RPMs are dual-plane, high-rise intakes with a 180 degree firing order. This manifold produces incredible top-end horsepower while retaining good throttle response. The Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams and other
-
61459 - Edelbrock BB-Chevy Performer RPM Aluminum Cylinder Heads
61459 - Edelbrock BB-Chevy Performer RPM Aluminum Cylinder Heads Performer RPM 454 Cylinder Heads These oval port heads will support over 540 hp with 9.5:1 compression when used as part of the Edelbrock Total Power Package. The unique oval intake port shape produces flow similar to rectangular ports, but the smaller port size provides excellent seat-of-the-pants performance and crisp throttle response. The semi-open chamber design maximizes efficiency with streetable compression ratios and the
$2,488Jeg's High PerformanceFind more:
-
Edelbrock® Twin Cam® Performer RPM Power Package
Edelbrock® Twin Cam® Performer RPM Power Package For use with gear drive cams ONLY. Edelbrock® Twin Cam® Performer RPM Power Package Part Number: Everyday Low Price: Gold Club Price: 434-275 $2,708.99 $2,438.09 Description Specs • This kit is designed to provide the correctly matched components necessary to achieve 103+ HP/ 97 ft lbs. torque levels • It includes round port cylinder heads, camshafts, pistons, adjustable pushrods, air cleaner, CD-Rom w/maps and all gaskets needed for the kit installation • It
$2,708Find more:
-
Cams, Performer Cam Kits, by Edelbrock
Product Detail Cams, Performer Cam Kits, by Edelbrock Chevy LS1 Performer RPM camshaft. Fits 96-02 engines. Duration @ .050 220/224 Lift .510/.510 Note: Produces 12" vacuum @ 1000 RPM. Use with high stall torque converter only. Edelbrock Performer RPM cams are dyno-matched to Performer RPM Power Packages. Roller tappets reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Intended for use with OEM or aftermarket hydraulic roller tappets.
$309.97motorpartscentralFind more:
-
Intake Manifolds, Performer RPM By Edelbrock - Manifold
Product Detail Intake Manifolds, Performer RPM By Edelbrock - Manifold Chevy 1955-86 262-400 c.i.d. Designed for spread-bore carbs such as the Performer RPM Q-Jet #1910. Delivers maximum power and a broad torque curve for high-performance street. Carb pad will accept square-bore carbs without adapters Fel-Pro SB Chevy Perf. Intake Manifold Gaskets $22.04 Cams, Chevy Performer RPM - Cam Kit $169.97 Gaskets-Engine overhaul gasket kits
$167.97Northernautoparts.com -
Edelbrock Performer RPM Cam and Lifter Kits
Edelbrock 7132 - Edelbrock Performer RPM Cam and Lifter Kits Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 310/320, Lift .520/.544 in., AMC, 343-401, Kit EDL-7132 Cam Style Hydraulic flat tappet Basic Operating RPM Range 1,500-6,500 Intake Duration at 050 inch Lift 234 Exhaust Duration at 050 inch Lift 244 Duration at 050 inch Lift 234 int./244 exh. Advertised Intake Duration 310 Advertised Exhaust Duration 320 Advertised Duration 310 int./320 exh. Intake Valve Lift with Factory Rocker Arm
Find more:
-
Edelbrock Performer RPM Camshaft Kit for 289/302
:: Edelbrock Performer RPM Camshaft Kit for 289/302 Edelbrock Performer RPM Camshaft Kit for 289/302 PERFORMER RPM CAMSHAFT KITS Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts.
$222.95Mustangs PlusFind more:
-
Edelbrock Performer RPM Cam Kits with Lifters , Big Block
Edelbrock Performer RPM Cam Kits with Lifters , Big Block All years. Designed for high performance and racing applications that operate in the 1500-6500 RPM range. Match these up with the Performer RPM Series manifolds. RPM camshafts have a slightly rough idle and require at least 9:5:1 compression, headers, lower gear ratio and higher stall converter is recommended for automatics. Note: Not for 1965-66 requiring grooved rear journal. Item Number: 13149 $174.95 KT
$174.95Find more:
-
46213 - Edelbrock Performer RPM E-Tec Signature Series Engine
46213 - Edelbrock Performer RPM E-Tec Signature Series Engine Limited Edition, Only 250 Produced This special GM ZZ383 short block offers umatched performance and collectibility. Edelbrock technicians assembled the Signature Series 383 by hand with polished E-Tec aluminum heads, polished RPM Air-Gap intake manifold, custom spec cam, specially-anodized Edelbrock water pump, and custom powdercoated air cleaner and valve covers. The valve covers feature each motor's serial number and Vic Edelbrock Jr's
$9.99Jeg's High Performance -
Edelbrock: Edelbrock Performer RPM Cam and Lifter Kits
Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 300/ 308, Lift .480/ .495, Mopar, Big Block, Kit Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform.
Find more:
-
EdelBrock Crate Performer Engine RPM for Jeep CJ YJ and TJ
EdelBrock Crate Performer Engine RPM for Jeep CJ YJ and TJ SKU: 45900 CJ, YJ, and TJ E-Tec 9.5:1 Compression 435 HP 435 ft/lbs of Torque Cast Parts This engine include: E-Tec 170 heads with 64cc chambers, racing valve covers, red roller rocker arms and hydraulic roller lifter cam. Get a brand new fully-assembled engine that’s virtually ready to run and delivers classic Edelbrock Performance right out-of-the-box. These engines include high-quality Edelbrock manifolds, carbs, cylinder heads and camshafts. Can
$6,185Find more:
-
Edelbrock 60679 Performer RPM Ford 429 460 aluminum cylinder heads
Edelbrock 60679 Performer RPM Ford 429, 460 aluminum cylinder heads. Designed for 1968-1987 429 and 460 engines. Ideal for high performance street, drag racing or marine applications. Over 500 plus horsepower at 6500 rpm and 525 plus ft lbs of torque at 4500 rpm with the Perfomer RPM Total Power Package of cam, intake, carburetor and heads. These heads will develop over 30 horsepower more than ported factory heads. Combustion chamber size is 75cc and intake port size is 292cc. Intake valve size is 2.19" and
Find more:
-
Edelbrock® Twin Cam® Performer RPM Power Package
Edelbrock® Twin Cam® Performer RPM Power Package For use with chain drive cams ONLY. Performance Parts Edelbrock® Twin Cam® Performer RPM Power Package Part Number: Everyday Low Price: Gold Club Price: 434-270 $2,711.99 $2,440.79 Description Specs • This kit is designed to provide the correctly matched components necessary to achieve 103+ HP/ 97 ft lbs. torque levels • It includes round port cylinder heads, camshafts, pistons, adjustable pushrods, air cleaner, CD-Rom w/maps and all gaskets needed for the
$2,710Find more:
-
Cams, Performer Cam Kits, by Edelbrock
Product Detail Cams, Performer Cam Kits, by Edelbrock Ford 289-302 Performer RPM roller camshaft. Duration @ .050 - 227 int. /234 exh, Lift .520 int. /.520 exh. Note: Use only with stock ratio rocker arms. Edelbrock Performer RPM cams are dyno-matched to Performer RPM Power Packages. Roller tappets reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Intended for use with OEM or aftermarket hydraulic roller tappets.
$245.97motorpartscentralFind more:
-
Cams, Performer Cam Kits, by Edelbrock
Cams, Performer Cam Kits, by Edelbrock Edelbrock Performer Cam Kits are Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts come with hydraulic lifters (except for cams designed for use with stock roller lifters), assembly lube and
$127.97Northernautoparts.comFind more:
-
Edelbrock Performer RPM LS1 Manifold & Timing Control Module
Edelbrock Performer RPM LS1 Manifold & Timing Control Module [7118] $707.95 Points & Redemptions Credit: 3.53975 Points Currently Valued at $3.54 This powerful new manifold is designed for the popular Chevrolet LS1 (5.7L) small-block V8 originally used in 1997 and later Corvettes and 1998-02 Camaros and Firebirds. It also fits the Corvette LS6 engine and any other Gen III engine including the LM7 (5.3L), LR4 (4.8L), and LQ4 (6.0L). It allows the use of a carburetor on these originally computer-controlled
$3.54ByunspeedFind more:
-
Edelbrock Performer RPM Cam Kits with Lifters , Small Block
All years. Designed for high performance and racing applications that operate in the 1500-6500 RPM range. Match these up with the Performer RPM Series manifolds. RPM camshafts have a slightly rough idle and require at least 9:5:1 compression, headers, lower gear ratio and higher stall converter is recommended for automatics. Item Number: 13148 $169.95 KT
$169.95Find more:
sponsored links
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
