-
Cam Bearing Installer & Remover
Removal shaft with installer and hold-down bolts Hardened steel construction Made in the U.S.A. NOTE: Replaces OEM NO. 42325
$169.99Dennis Kirk -
Balancer Shaft and Bearing Installer Tool
Installs and properly aligns new balancer bearing and counter-balancer shaft To remove old balancer shaft from engine case, use Part No. 28-2787 Fits Twin Cam 07-08 B motors
$85.99Dennis KirkFind more:
-
Cam Bearing Installer and Remover - Update Kit
For use with H28227 Update kit includes removal shafts required for use on models listed Made in the U.S.A.
$137.99Dennis Kirk -
Inner Cam Bearing Installation Tool
Makes it easy to press the inner cam bearing smoothly into right case when the cases are assembled to the proper depth Fits Big Twin 58-99, except Twin Cam 88 Made in the U.S.A.
$117.99Dennis KirkFind more:
-
CAM BEARING INSTALLER AND REMOVER TOOL
CAM BEARING INSTALLER AND REMOVER TOOL Features Made from hardened steel Includes removal shaft with installer and hold-down bolts Update kit includes removal shafts required for use on 06-08 models listed Description DS-198809 FITS: 99-06 Twin Cam, REPL. OEM: #42325 $177.95 3801-0068 FITS: 06 Dyna; all 07-08 Twin Cam models - Update Kit $144.95 page 1174
$177.95Drag Specialties -
Northcoast Tool 5659 Inner Cam Bearing Installer, Late Twin Cam, for Harley
Northcoast Tool 5659 Inner Cam Bearing Installer, Late Twin Cam, for Harley Part Number: MPX5659 Description This too will align and install the inner cam bearings with the engine cases for a precision fit. Has a black oxided finish and is Made in USA. Carries a 2 year manufacturers defect warranty. Will fit 2006 Dyna and all 2007 Twin Cam Models. Availability: In stock. Usually ships within 24 hours. Ships via UPS. Northcoast Tool 5659 Inner Cam Bearing Installer, Late Twin Cam, for Harley.
$123.96 -
JIMS 991 Twin Cam Inner Cam Bearing Installer for Harley-Davidson
JIMS 991 Twin Cam Inner Cam Bearing Installer for Harley-Davidson Part Number: JIM991 Description Use this tool to press in the two inner cam bearings, JIMS® No.8991K new cam bearings. This tool has been designed to press from the letter side of the inner cam bearings, by putting all the pushing pressure to the very outer wall of bearing shell. Eliminating any damage to the bearings, cam and cases. This tool will stop at the case and set the bearing depth to .023” to .028” below the case surface. Use with
$146.95Find more:
-
JIMS 1146 Twin Cam® Crankshaft Bearing Installer & Remover for Harley-Davidson
JIMS 1146 Twin Cam® Crankshaft Bearing Installer & Remover for Harley-Davidson Part Number: JIM1146 Description Designed to protect expensive engine cases by using a specially designed support block to remove or install cam side crankshaft bearing. No.1146 - Use on all 2000-present Twin Cam® "Beta" Softails®. JIMS 1146 Twin Cam® Crankshaft Bearing Installer & Remover for Harley-Davidson
$227.17Find more:
-
Engine Tool, Cam Bearing Installer Twin Cam 88 1999/L* To Install Inner-Cam Bearings Jims 1278 SKU # 60830
Shopping Cart Engine Tool, Cam Bearing Installer Twin Cam 88 1999/L* To Install Inner-Cam Bearings Jims 1278 SKU # 60830 $141.09 List Price: $147.10 - Savings: $6.01 Engine Tool, Cam Bearing Installer Twin Cam 88 1999/L* To Install Inner-Cam Bearings Jims .1278
$128.53narleychoppers -
Comp Cams POW101025 Univ Cam Bearing Installer
UNIV CAM BEARING INSTALLER
$254.70hdmaddogFind more:
-
CRANKSHAFT BEARING INSTALLER/REMOVER INSTALLER/
CRANKSHAFT BEARING INSTALLER/REMOVER INSTALLER/ Features Designed to protect engine cases by using a specially-designed support block to remove or install cam side crankshaft bearing Description DS-196316 Twin Cam "B" Motor Crankshaft Bearing Installer/Remover. FITS: 00-09 Twin Cam "B" motors (Softails). $285.95 Twin Cam "B" Motor Crankshaft Bearing Installer/Remover. FITS: 00-09 Twin Cam "B" motors (Softails). page 1170
$285.95Drag Specialties -
Jims Inner Cam Bearing Installer, For Twin Cam 88 models from 1999 to present
Jims Inner Cam Bearing Installer, For Twin Cam 88 models from 1999 to presentJims Inner Cam Bearing InstallerInstalls the two inner cam needle bearings by aligning the shaft bores for a precision press-fit. For Twin Cam 88 models from 1999 to present
$125.99Find more:
-
JIMS 993 Inner Cam Bearing Remover Tool for Harley-Davidson
JIMS 993 Inner Cam Bearing Remover Tool for Harley-Davidson Part Number: JIM993 Description Use this tool to easily remove the inner cam bearing. Works the same as JIMS® EVO Cam tool No.95760-TB. Insert puller collet into the cam bearing I.D. Insert dowel pin, place remover body over collet, lube threads and with hand tools the bearing is pulled from case. This precision tool will also keep all pin bearings from falling into the engine case. Install JIMS® new cam bearings No.8991K with JIMS® Tool No.991.
$180.81 -
INNER CAM BEARING INSTALL HANDLE/DRIVER
INNER CAM BEARING INSTALL HANDLE/DRIVER Features Description DS-196042 page 1175
$69.94Drag SpecialtiesFind more:
-
Jims Cam Removal and Installer Tool, For Twin Cam 88 models from 1999 to present
Jims Cam Removal and Installer Tool, For Twin Cam 88 models from 1999 to presentJims Cam Removal and Installer Tool This multi-function tool will remove and replace front and rear camshafts and ball bearings. It precisely holds the camshaft to insure a smooth press in and out of the support plate. For Twin Cam 88 models from 1999 to present
$137.99Find more:
-
JIMS® Inner Cam Bearing Installer
2001 Harley FXD Dyna Super Glide 19k Miles 20289: JIM S INNER CAM BEARING INSTALLER USE ON TWIN CAM MODELS 1999 TO PRESENT. REPLACES OEM# 42325 MFG# 1278 (OEM: 1278) JIMS Inner Cam Bearing Installer Installs the two inner cam needle bearings by aligning the shaft bores for a precision press-fit. Jims Machining 4.50" x 9.00" x 2.50" 3.80 lbs Price: $138.99
$138.99RetrocycleFind more:
-
JIMS 973 Timken® Bearing or Race Installer Adapter Kit for Harley-Davidson
JIMS 973 Timken® Bearing or Race Installer Adapter Kit for Harley-Davidson Part Number: JIM973 Description This tool will upgrade your earlier JIMS® No.97222-55 bearing installer tool to work on the latest fine spline Twin Cam® sprocket shafts. This tool is designed to install either H-D® No.9028 Timken® bearing or the roller bearing race from H-D® No.24004-03 bearing assembly onto the sprocket shaft as shown in the above photos. No.973 - Use on all Big Twins 2006-present FXD's or 2007-present FXST's &
$59.38 -
BALANCER SHAFT AND BEARING INSTALLER TOOL
BALANCER SHAFT AND BEARING INSTALLER TOOL Description Aligns and safely installs new balancer bearing and counterbalancer shaft. For removal of balancer shaft from engine case use PART #3801-0085. For 07-08 Twin Cam “B” motors
$6.00adventureharleydavidsonFind more:
-
Cam Bearing Installer For 2007 & later Twin Cam
Shopping Cart Description: Cam Bearing Installer For 2007 & later Twin Cam Use to install inner cam needle bearings Designed to press from the letter side of the inner cam bearing to eliminate any damage to the Will set bearings .023" - .028" below case surface For 07 & later Twin Cam models 3801-0064
$188.82heritagecycleworksFind more:
-
JIMS USA Harley Davidson Motorcycle Inner Cam Bearing Installer
JIMS USA Harley Davidson Motorcycle Inner Cam Bearing Installer Toolsource #102024 Manufacturers Part Number #991 $146.78 2006 - present Dyna and 2007 - present FL and FLXT Use with JIMS p/n 993 Promotes longest bearing and cam life. Inner Cam Bearing Installer This products was last updated on Friday 24 April, 2009 Product Reviews
$146.78Find more:
sponsored links
-
Cam Bearing Installer
Vehicle Parts & Accessories! Bid on Cam Bearing Installer.
www.eBay.com -
Camshaft Bearing Installer
Compare Prices and Save at SHOP.COM
www.SHOP.com -
Cam Bearing Installer
Everything You Need For Installing Your Cam. Fast Shipping.
JEGS.com -
Cam Bearing
ISO 9001: 2000 Certified. High Quality & Performance Bearings.
www.IBSCO.com
TheFind helps shoppers find products from more than 500,000 stores and online merchants all at once. Although we make every effort to present accurate product and store information, including prices and inventory availability, TheFind cannot guarantee and is not responsible for inaccuracies or omissions. Please report any errors you find. We encourage you to give us feedback so that we can continue to improve TheFind.com and serve you better.
