DS-280473 1-4200LCA Headwinds Headwinds Spotlight Housing Bradley Bullet Chrome 4 ½" Spotlight Housing Bradley Bullet Chrome-plated machined spun aluminum Reflective bezel screws into a threaded housing, which gives the spotlight a continuous circumference 3/8"-16 mounting stud is hollow, which allows wires to pass through for clean mounting Accepts most 4 ½" sealed beam or halogen beams; sold separately Sold each Made in the U.S.A.
4 1/2 SPOTLIGHT WITH VISOR Features Includes chrome visor, rim, housing, 55W H3 halogen bulb, swivel mount and wiring; sold each Not DOT or ECE approved Description DS-280055 $50.95 page 654
4 1/2 DIAMONDSTYLE SPOTLIGHT Features Smooth chrome housing Late-style stud mount Diamond-style clear or blue tint lens available Blue tint lens provides a whiter, brighter headlight beam DOT and ECE approved, includes a standard H3 (50W) bulb Sold each Description 2001-0101 COLOR: Clear lens - 4 1/2 DIAMONDSTYLE SPOTLIGHT $56.95 2001-0102 COLOR: Blue tint lens - 4 1/2 DIAMONDSTYLE SPOTLIGHT $56.95 page 654
HEADWINDS HOODED HEADLIGHTS HOUSING HEADWINDS HOODED HEADLIGHTS HOUSING These beautiful Custom headlight housings are made of thick aluminum sheet to ensure they remain rigid after the grooves are milled. The lamp is slightly recessed for a hooded appearance and is held in position using a threaded ring, so there are no exposed rivets or bolts. Also the Billet aluminum mounting bracket is attached to the housing, so a very clean look is achieved. The standard bracket position fits 1980 thru 1986 FXWG and
Using a 55/60 watt H4 halogen bulb, these headlights project a strong white beam uniquely directed by a gemstone inspired reflector. This feature results in a focused fan of light, eliminating the dark center usually associated with the use of halogen bulbs. 4-1/2" passing lamps include 35 watt H3 bulbs. Since this headlight was designed for a motorcycle, not a car or a tractor, installation is simple and straight forward. No special bulbs required. DOT Approved. (5 stars) reviewed on 04/16/08 by CHRIS
Here is the ultimate value in 18-volt cordless combo kits. The KC18DVF3 kit from hitachi includes: a DS18DVF3 18-volt drill, a C18DMR 6-1/2-inch circular saw, a CR18DMR reciprocating saw, and a UB18DL lantern. The drill delivers 400 in/lbs of torque and has a strong 1/2-inch keyless chuck. The circular and reciprocating saws are combo kit exclusives. The circular features a lightweight magnesium tool housing, a durable steel base plate, and an exclusive spotlight to help see cut lines in dimly lit areas. It
KC18DBL Hitachi 18V 3.0Ah Lithium Ion 4-Tool Combo Kit 482.50 KC18DBL 37.00 features includes specifications DV18DL Hammer Drill Class leading 570 in/lbs of Torque to power through the toughest jobs 2 step speed switch provides 4 speed settings for ultimate control Externally accessible carbon brush for quick and easy brush changes Convenient 5-position belt hook features an integrated amber LED work light Compact and lightweight - only 9.95" in length and 4.9 lbs CR18DL Reciprocating Saw Offers a best in
"4\"H x 2-1/2\"D 120 volts 10 watts Accent spot Plug-in Halogen Floor or wall mount 5' cord Steel housing Black 1-MR11 10W/12V G4 halogen included Replacement bulb Ace No. 3354461"
Spotlight Tri-bar 4-1/2″ with H3 Bulb Spotlight Tri-bar 4-1/2″ with H3 Bulb Customer Rating: Description Product Reviews Specs • Make your bike stand out in a crowd • When using the optional ‘rainbow’ bulb the Alpha Tri-Bar styling creates a unique psychedelic effect when the light is on, and puts on a great light show when your bike is parked • These units replace stock headlights and include replaceable 55/60 watt bulbs • Rainbow bulb sold separately Note: This item is a custom fit component, and does not
Chrome-plated machined spun aluminum Reflective bezel screws into a threaded housing- which gives the spotlight a continuous circumference 3/8``-16 mounting stud is hollow- which allows wires to pass through for clean mounting Accepts most 4 1/2`` sealed beam or halogen beams- sold separately Sold each Made in the U.S.A. Click Here for current availability Footnotes: BRADLEY BULLET Mfg`s #: 14200LCA Photo and descriptions are generic. Read TITLE and any FOOTNOTES carefully. All our items are brand new. If
Features: Emergency models (AC only) - - - The light will come on within three seconds of AC power failure. When power is restored, the light will go off and will automatically recharge. During extended power outages a built-in, low voltage cut-off will shut the light off when the battery is depleted to 4.5 volts. The cut-off feature can be overriden by manually switching the light on and off. Rechargeable battery lasts 1,000 or more charges. Halogen bulbs shine 12 1/2 times brighter than a regular
:: Guest 500A Remote Control Spotlight Guest 500A Remote Control Spotlight A powerful, halogen spotlight. All Beamers and console controls are water-resistant, easy to install and mount in any position. Constructed of tough, UV-stabilized Lexan, the Beamer features 355 degrees horizontal rotation, 40 degrees upward adjustment angle and 35 degrees downward adjustment angle. The housing measures 10-1/8 inches H x 7 inches W x 7-1/2 inches D, with a 4-1/2 inch square mounting base. Includes a 15 foot remote
Chrome-plated machined spun aluminum Reflective bezel screws into a threaded housing- which gives the spotlight a continuous circumference 3/8``-16 mounting stud is hollow- which allows wires to pass through for clean mounting Accepts most 4 1/2`` sealed beam or halogen beams- sold separately Sold each Made in the U.S.A. Click Here for current availability Footnotes: MARIAH Mfg`s #: 14400LCA Photo and descriptions are generic. Read TITLE and any FOOTNOTES carefully. All our items are brand new. If this is
Easy to install - fully adjustable. Stamped steel shell with scalloped 1-piece trim ring. Standard sealed-beam spotlight.
(5 stars) reviewed on 01/23/09 by Ruben from Orlando, FL for a 1998 Royal Star Tourer Deluxe wrote: The look great. Very bright too! (4 stars) reviewed on 11/08/07 by Frank from South Amboy, NJ for a 2006 Silver/blue Road Star 1600/1700 wrote: Nice looking lights. Really brings out the front end due to the clear lens and crome reflectors. However, this product DOES NOT FIT my cobra lightbar 4 1/2" spotlight assemblies. There isn't enough room for the headlamps because of the bigger depth of the lamp. Even
The Solar Powered Motion-Activated 14 LED Security Spotlight saves you money by providing free energy from the sun. The Solar Powered Motion-Activated LED Security Spotlight protects walkways, driveways, garages, and sheds with it??s 14 super bright LEDs. When charged in full sunlight, the LED Security Light can activate up to 180 times when on for 60 seconds at a time.You can set the Solar Powered LED Security Floodlight to turn on automatically at night for 10 seconds to 1 minute when the adjustable PIR
Product Description 16.1350SL Remote Control Spotlight Features: Rotates 320° with a 75° vertical sweep. Weather- and corrosion-resistant white thermoplastic housing. Control panel includes a fused on/off switch and an 8-way directional switch for precise beam control. 50 Watt, 100,000 CP, sealed beam halogen spot bulb included. 15’ power cable. Stainless steel mounting hardware. Specifications: 12 volts 3.9 Amps 100,000 CP / 50 Watts Dimensions: 7 15/16” H X 7 1/8” W x 7 1/4” D - housing 2 1/2” H X 4” W x
Drag Specialties Spotlight Diamond Style Clear Lens Chrome 4 ½" Clear Lens Diamond Style Smooth chrome housing Late-style stud mount Diamond-style clear or blue tint lens available Blue tint lens provides a whiter, brighter headlight beam DOT approved, includes a standard H3 (50W) bulb For replacement sealed beams and bulbs Sold each
Headwinds Spotlight Housing Mariah Chrome 4 ½" 28-124-0160 Headwinds 1-4400LCA DS-280474 Mariah 4 ½" Spotlight Housing> Chrome-plated machined spun aluminum Reflective bezel screws into a threaded housing, which gives the spotlight a continuous circumference 3/8"-16 mounting stud is hollow, which allows wires to pass through for clean mounting Accepts most 4 ½" sealed beam or halogen beams; sold separately Sold each Made in the U.S.A.
You are ordering Part #KC18DVF 18V 4-Piece Combo Kit Here is the ultimate value in 18V cordless combo kits. The model No. KC18DVF3 kit from Hitachi includes: (model No. DS18DVF3) 18V drill, (model No. C18DMR) 6-1/2 IN circular saw, (model No. CR18DMR) reciprocating saw, and (model No. UB18DL) lantern. The drill delivers 400 in./lb. of torque and has a strong 1/2 IN keyless chuck. The circular and reciprocating saws are combo kit exclusives. The circular saw features a lightweight magnesium tool housing, a