The Crosby 1021110 G-2140 bolt type alloy anchor shackle for heavy lifting and use in long-term or permanent installations and rigging systems, or in situations where loads may slide, is made of forged alloy steel galvanized for added strength and corrosion resistance and has a working load limit of 30 metric tons. It is equipped with a programmable radio-frequency identification (RFID) chip for electronic inspection systems. Working load limit and two 45-degree angle indicators are forged into the shackle.
Hydraulic Maintenance Set, Tonnage Capacity 10 Ton, Stroke Length 6 In., Max. Pressure 10,000 psi, Number of Pieces 14, For Bending, Pushing, Pulling and Spreading, Includes Hand Pump Assembly with Hose, Heavy Duty Spreader Ram, 2 3/4 In. Rubber Head,...
This Torin 10 Ton Hydraulic Ram System is an auto body repair kit that features extension tubes with a snap-lock design for quick, easy assembly. The pump has an automatic overload system to help prevent damage to rams and equipment. The Flex Head features a permanently molded rubber pad, Interlocked to prevent separation. Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, bending and spreading. Meets ASME safety standards. Max. Lift Height in. 24
Hydraulic Maintenance Set, Tonnage Capacity 4 Ton, Stroke Length 4 3/4 In., Max. Pressure 10,000 psi, Number of Pieces 15, For Pushing, Spreading, and Pressing, Includes Hand Pump Assembly with Hose, Heavy Duty Spreader Ram, 2 3/4 In. Rubber Head,...
Hydraulic Maintenance Set, Tonnage Capacity 10 Ton, Stroke Length 6 In., Max. Pressure 10,000 psi, Number of Pieces 14, For Bending, Pushing, Pulling and Spreading, Includes Hand Pump Assembly with Hose, Heavy Duty Spreader Ram, 2 3/4 In. Rubber Head, Rubber Faced Flat Base, Ram Toe and Plunger Toe, Chrome Plated, Long Life Ram Plunger, Serrated Saddle, Wedge Head, Combination Head, 27, 18, 10 and 4 1/8 In. Extension Tubes
3 Ton Cable Winch-Hoist with Latch Hook Medium Frame Exclusive drum anchor - swaged ball shank terminal locks cable securely in drum and allows for full extension of cableProprietary reversible handle - always a downward pull, switches positions in secondsCable end has hydraulically crimped copper sleeveInterlocking pawl system will not slipSelf-storing aircraft cableSelf lubricating bearings Wt. Cap.: 2 tonsLifting Height/Take-Up: 20.00 ftPull Force: 110 lbf [Max]Cable/Wire Size: 1/4 inCable Length: 22.0
features and benefits: snap lock design for quick and easy assembly automatic pump overload system protects against damage to rams and equipment comes in a blow molded case heavy walled extension tubes stand up in tough situations total weight: 46 pounds this 4 ton porto-power kit delivers the pushing and spreading power needed to make easy work of everyday repairs. Flex head features permanently molded rubber pad-interlocked to prevent separation. Long handles provide low pumping effort. 1/2 ton capacity
Making your Lifting Job Effortless with Air Actuated Long Chassis Service Jack Omega 22101C Service Jack is a 10 Ton air actuated long chassis service jack. It is built with heavy gauge, steel frame that helps preventing the distortion and twisting. At the same time, it allows you to access to difficult-to-reach load points. Omega 22101C Service Jack equips with the high speed air turbo motor to raise the load to the desired height efficiently, effortless, and safely. Omega 22101C service jack features the
Lifting Trucks and Trailers with Ease Omega 23501 Axle Jack is a 50 Ton air actuated hydraulic truck jack that is equipped with the high speed air turbo motor to raise the load to the desired height efficiently, effortless safely. With in-line air filter, it traps contaminates and protects air motor for longer life. Omega 23501 Truck Jack features sturdy one piece handle assembly with the fingertip remote control. It also gives you a choice of three handle angles - 90-degrees, 45-degrees or 0-degree for
JG-300A 3 Ton Wire Rope Grip Puller with Cable Jet JG series grip pullers incorporate proven industrial designs that lift, lower, stretch or pull heavy loads. Available in 1, 2.5 and 5 tons configurations, Jet grip pullers are manufactured with lightweight zinc-plated steel to resist corrosion and a double sealed ratchet wheel brake system increasing safety on the jobsite. Jet JG series grip pullers comply with ANSI/ASME B30.21 standards. Jet tools is committed to being the tool supplier you can depend on
Industry standard couplers are interchangeable with leading manufacturer's units. Single-speed hydraulic hand pump and ram with 6 in. stroke. Snap together design of extension tubes allows for easy assembly. Sturdy extension tubes hold up in even the toughest situations. Automatic overload system on pump protects against damage to equipment. Features 1/2-ton hydraulic spreader tool has 2 in. jaws that spread from 5/8 in. to 3-3/8 in. Includes a sturdy plastic case. Item Weight - 81.000 lbs.
Features and Benefits: Uniweld constructed hydraulic assembly for increased strength and leak prevention Foot pump pedal for quickly raising the lift arm Locking lever on "T" handle locks handle in 3 different positions Release knob on top of handle operates independently of handle locking lever Safety by-pass and overload systems prevent over extending the ram and prevent jack from being used beyond its rated capacity Flash chromed ram and pump piston inhibit rust. Full swivel ball bearing caster wheels
Features:* Hydraulic system actuated to provide smooth positive power for the removal and installation of single tandem and duplex tires and wheels* Heavy duty tubular construction with precision crafted cradle rollersSpecifications:* Capacity: 3/4 Tons* Lifting Range: 3 to 9-Inches* Lifting Arm Dimension: 27-1/2 x 26-Inches* Tilt Range: -2.5 to 5.5-Degrees* Product Size: 42-7/8 x 38-1/2 x 34-5/8-Inches* Weight: 201 -PoundsWhat & #39 ;s In The Box:* Omega 47050 3/4 Ton Wheel Dolly
Weatherproof, simple construction with fewer parts Hoistaloy load chain and hardened steel link type load chain Weatherized weston-type automatic braking system One-hand operation and control - only 58 pounds of pull required for 3/4 ton model capacity Forged upper and lower hooks with latches standard, free wheeling </ul>
"""Campbell Series GX forged steel fixed eye plate clamp has grip range of 1/16"""" - 3/4 Eye plate clamp has working load limit is 1/2 ton and can be used for both vertical/horizontal lifting. Lifting clamps grip range: 1/16-3/4 inches Lifting clamps working load limit: 1 ton Type: Series GX Drop-forged and heat-treated components Can be used for both vertical and horizontal -to -vertical through 180° Exclusive feature is a patented wear indicator system When convex teeth are flattened between unique wear
Impact resistant, stamped steel frame, gear case and cover for durability and light weight Hardened steel load sharing gears Double pawl arrangement for assured load control Two chain guide rollers for positive chain engagement Weston type braking system for positive load control and positioning Simple one-handed, free chaining for fast load attachment Minimal maintenance with no special tools required 653 Series Lever Chain Hoist 3/4 Ton Capacity 10ft. Lift is one of many Hoists & Pullers available through
Hydraulic Maintenance Set, Tonnage Capacity 4 Ton, Stroke Length 4 3/4 In., Max. Pressure 10,000 psi, Number of Pieces 15, For Pushing, Spreading, and Pressing, Includes Hand Pump Assembly with Hose, Heavy Duty Spreader Ram, 2 3/4 In. Rubber Head, Rubber Faced Flat Base, Ram Toe and Plunger Toe, Chrome Plated, Long Life Ram Plunger, Serrated Saddle, Wedge Head, Combination Head, 19 1/2, 16 1/2, 8 1/2, 6 1/8 and 3 In. Ex
1/2-Ton Compact Lever Hoist with 10' Lift Jet 181510 1/2-Ton Compact Lever Hoist with 10' Lift Jet gives you a chain hoist capable of handling commercial and industrial tasks with this 1/2-Ton Compact Lever Hoist with 10' Lift (181510). Its Weston style dual pawl brake system's double pawl design increases safety by splitting the load to opposite sides of the ratchet gear for greater load security. Jet 181510 1/2-Ton Compact Lever Hoist with 10' Lift Features Product Description Jet gives you a chain
S90-300-10, 3 Ton Hand Chain Hoist with 10 ft. Lift - 101940. Weston style dual pawl brake system's double pawl design increases safety. Industrial rated alloy steel hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing jobsite safety. Needle bearing design promotes long hoist life with low wear reducing downtime. Heat treated, case hardened and corrosive resistant coated internal parts extend the life of the hoist in the harshest of environments. Grade
Jet gives you impressive load capacity, durability and strength with this JLP-150-5 1-1/2 Ton Lever Hoist 5' Lift (187711). Made of strong steel, its completely enclosed Weston type automatic brake system holds a load in any position, and it has a hardened grade 80 low wear chain.
JET S90 Series hand chain hoists were designed with reliability and durability to perform in light-duty industrial applications. Easily maintained and serviced, the JET S90 is available in capacities from 1/2 ton to 10 ton and standard lifts of 10, 15, 20, and 30-ft (custom lifts available). The JET S90 is the ideal contractor grade hoist. Weston style dual pawl brake system's double pawl design increases safety. Alloy steel industrial rated hooks rotate 360 degrees for easy rigging; hooks slowly stretch to
LUG-ALL Marine grade medium frame hoist-winch with 2 tons capacity is used to pull 5 lbs for double line, 0 lbs for single line with precision lifting up to 5', 30' respectively. Hoist-winch is made of aluminum alloy for durability..Working load limit: 2 ton.Standard lift: 0 ft for double line, 20 ft for single line.Pulling force: 5 lb for double line, 0 lb for single line.Material: Aluminum alloy.Operating type: Ratchet.Cable lengths: Medium frame cable lengths on a LUG-ALL cable ratchet lever hoist range
Safety Patented Fused Brake Design- Proven durability that increases safety with a lifetime replacement warranty Weston Style Dual Pawl Brake System- Double pawl design increases safety Alloy Steel Hooks- Industrial rated hooks rotate 360 degrees for easy
Impact resistant, stamped steel frame, gear case and cover for durability and light weight- Hardened steel load sharing gears - Double pawl arrangement for assured load control - Two chain guide rollers for positive chain engagement - Weston type braking system for positive load control and positioning - Simple one-handed, free chaining for fast load attachment - Minimal maintenance with no special tools required SKU: ORSNO30648
Features: Safety by-pass and over-load systems protect hydraulics. U.S. Patent No. 5 946 912 Heavy-gauge steel frame helps prevent distortion or twisting Convenient foot pedal designed for fast no load lifts. Item Weight - 436.000 lbs. Specifications: Capacity (Ton) - 10 Minimum Height - 7 in. Maximum Height - 27 in. Handle Length - 42-1/8 in. Jack Size - Length - 54-3/4 in. Jack Size - Width - 20 in. Jack Size - Height - 12-3/4 in. </ul>
The Milwaukee 9691-20 is a 3 Ton 20 Lever Hoist. The old standard the Lever Hoist line from Milwaukee offers a wide range of load capacities and lift heights to fit any need. Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application. Features:3 ton rated capacity 20 ft. standard liftChain pull to lift rated load: 61 lbs.Weston-type automatic braking system for positive load controlSteel chain guide roller and chain stripper for smooth chain